November 19, 2026
Journal Article

Integration of Fiber-Optic Sensors into Wrought Alloys Using a Confined Rolling Process

Abstract

This study presents a novel confined hot rolling technique for embedding optical fiber sensors into wrought metallic components, aiming at enabling real-time strain monitoring in extreme environments such as advanced nuclear reactors. A finite element method (FEM) model was used to investigate the stress-strain response of embedded fiber assemblies under various rolling conditions. Multi-pass rolling was found to reduce stress concentrations, shear gradients and roll separation force compared to single pass deformation. Guided by simulation results, experimental trials were conducted on a 316 stainless steel (SS316) plate with precision-machined channels housing sapphire optical fibers within the tubes. The assemblies were hot rolled at 900°C to achieve a 40% total thickness reduction. Microstructural analysis confirmed progressive channel closure and strong bonding at both tube-matrix and fiber-tube interfaces, with no significant interfacial defects. To assess process adoptability, copper-coated silica fibers were embedded into aluminum alloy 6061 (AA6061) plates using the same method. Optical backscatter reflectometry during thermal cycling of the rolled sample showed a positive spectral shift after rolling, indicating the development of compressive residual stress. The integrated computational and experimental approach demonstrates a scalable and robust pathway for embedding optical sensors into structural metals for high-temperature structural health monitoring.

Published: November 19, 2026

Citation

Kalsar R., L. Li, A. Birri, S. Niverty, D.C. Sweeney, S. Shukla, and A. Soulami, et al. 2026. Integration of Fiber-Optic Sensors into Wrought Alloys Using a Confined Rolling Process. Smart Materials and Structures 35, no. 10:Art. No. 105032. PNNL-SA-218311. doi:10.1088/1361-665X/aeadf9

Research topics