November 10, 2026
Journal Article
Influence of Electron Beam Energy on the Mechanical and Visual Properties of Medical-Grade Silicone
Abstract
Efficient sterilization of silicone-based medical devices demands a balance between microbial inactivation and preservation of material integrity. To enable cost-effective in-line and end-of-line sterilization prior to multi-unit packaging, we evaluated medical-grade silicone exposed to low to medium-energy electron beam (1.8, 2.3, 3.0, 4.0 MeV) and a conventional 10 MeV process at 15, 25, and 35 kGy. Mechanical, spectroscopic, and optical responses were measured, and the effects of radiation absorbed and energy were quantified using linear regression (a = 0.05). Across all energies, absorbed dose was the dominant factor: 50% secant modulus and Shore M hardness increased with dose while elongation at break and ultimate tensile strength were largely preserved. Attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectra showed no new bands or wavenumber shifts, indicating that irradiation up to 35 kGy produced no detectable chemical changes within the equipment detection limits. Yellowing of samples increased with dose at all energies, with a clear energy-dependent enhancement only at intermediate lower energies (2.3–4.0 MeV). Beam energy exerted a secondary influence on material response, with low to medium-energy (1.8–4.0 MeV) irradiation generally producing slightly greater increases in stiffness and yellowing than 10 MeV processing at equivalent doses. This study indicates that a 1.8–4.0 MeV electron beam system could be used as a compact sterilization approach while preserving the mechanical integrity and characteristic chemical structure of medical-grade silicone.Published: November 10, 2026