JANUARY 21, 2026 Journal Article Rheology and Engine Performance of Very Low Sulfur Fuel Oil Blended with 10% Fast Pyrolysis and Hydrothermal Liquefaction Oils in a 2-Stroke Crosshead Engine ( Read More )
JANUARY 20, 2026 Report AA 7075 Sheet with 700 MPa Strength for Automotive Structural Components (CRADA 520) ( Read More )
NOVEMBER 11, 2025 Journal Article In-situ synchrotron X-ray diffraction of ultrasonic microstructural refinement during solidification in a commercial Al-Si-Mg alloy ( Read More )
OCTOBER 22, 2025 Journal Article Cladding and butt-joining dissimilar aluminum alloys simultaneously via Shear Assisted Processing and Extrusion ( Read More )
SEPTEMBER 3, 2025 Journal Article Feasibility of Algal Biochar, a Byproduct of Biofuels Production, as a Supplemental Cementitious Material ( Read More )
AUGUST 30, 2025 Journal Article Hydrothermal Liquefaction of Wastewater-Grown Algae to Produce Sustainable Aviation Fuel: A Combined Experimental Study and Techno-Economic Assessment ( Read More )
AUGUST 20, 2025 Journal Article Advancing Sustainable Aviation Fuel with High-Energy-Density Bicycloalkanes Production from Corn Stover Mixed Sugars ( Read More )
AUGUST 14, 2025 Journal Article Improving Adhesive Bonding of Short Carbon Fiber Thermoplastic Composites to Aluminum Alloys with a Hybrid Laser-plasma Surface Modification Strategy ( Read More )
JULY 24, 2025 Journal Article Bio-Oil Impact on Water Diffusion and Durability of Bitumen: Influence of Aging and Salinity ( Read More )
MAY 21, 2025 Journal Article Techno-Economic Analysis and Life Cycle Assessment for the Separation of 2,3-Butanediol from Fermentation Broth Using Liquid-Liquid Extraction ( Read More )
MAY 13, 2025 Journal Article Multiple-Repeated Plasma Surface Treatments for Significantly Improving Bonding Performance of Metal-Carbon-Fiber-Reinforced Thermoplastic Polymer Dissimilar Adhesive Joints ( Read More )
MAY 6, 2025 Journal Article Optimizing Bendability and Hardness of Age-Hardenable Aluminum Sheets through Local Thermo-Mechanical Processing ( Read More )
APRIL 23, 2025 Journal Article Tribological Behavior of Hybrid Aluminum-TiB2 Metal Matrix Composites for Brake Rotor Applications ( Read More )
APRIL 10, 2025 Journal Article A comparative analysis of residual stresses from friction stir processing of aluminum cast 380 and wrought 7075 alloy sheets: Experimental characterization and modeling ( Read More )
APRIL 8, 2025 Journal Article Techno-economic analysis of bioplastic and biofuel production from a high-ash microalgae biofilm cultivated in effluent from a municipal anaerobic digester ( Read More )
JANUARY 17, 2025 Report Whole Algae Hydrothermal Liquefaction and Upgrading: A review of progress and challenges and insight into the future ( Read More )
JANUARY 16, 2025 Report Wholly Sustainable, Cost-Effective Carbon Fiber-Nylon Compounds (CRADA 592) Final Report ( Read More )
JANUARY 15, 2025 Journal Article Improving dairy manure hydrolysis and acidification through microbial community restructuring by adaptation to hyperthermophilic conditions ( Read More )
JANUARY 15, 2025 Report 2024 Case Study: Hydrothermal Liquefaction of Biomass Sources at a Wastewater Treatment Facility ( Read More )