Recently, there has been increased interest in using prognostics (i.e, remaining useful life (RUL) prediction) for managing and mitigating aging effects in service-degraded passive nuclear power reactor components. A vital part of this philosophy is the development of tools for detecting and monitoring service-induced degradation. Experience with in-service degradation has shown that rapidly-growing cracks, including several varieties of stress corrosion cracks (SCCs), can grow through a pipe in less than one fuel outage cycle after they initiate. Periodic inspection has limited effectiveness at detecting and managing such degradation requiring a more versatile monitoring philosophy. Acoustic emission testing (AET) and guided wave ultrasonic testing (GUT) are related technologies with potential for on-line monitoring applications. However, harsh operating conditions within NPPs inhibit the widespread implementation of both technologies. For AET, another hurdle is the attenuation of passive degradation signals as they travel though large components, relegating AET to targeted applications. GUT is further hindered by the complexity of GUT signatures limiting its application to the inspection of simple components. The development of sensors that are robust and inexpensive is key to expanding the use of AET and GUT for degradation monitoring in NPPs and improving overall effectiveness. Meanwhile, the effectiveness of AET and GUT in NPPs can be enhanced through thoughtful application of tandem AET-GUT techniques.
Revised: September 4, 2013 |
Published: September 30, 2011
Citation
Meyer R.M., P. Ramuhalli, L.J. Bond, and S.E. Cumblidge. 2011.Developing Effective Continuous On-Line Monitoring Technologies to Manage Service Degradation of Nuclear Power Plants. In IEEE Conference on Prognostics and Health Management (PHM 2011), June 20 - 23, 2011, Montreal, Quebec, Canada, 1-7. Piscataway, New Jersey:Institute of Electrical and Electronics Engineers, Inc.PNNL-SA-79932.doi:10.1109/ICPHM.2011.6024335