Phosphine oxide substitution of small molecules with high triplet exciton energies allows development of vacuum sublimable, electron transporting host materials for blue OLEDs. Heteroaromatic building blocks (carbazole, dibenzofuran and dibenzothiophene) with ET ~ 3 eV were incorporated into phosphine oxide (PO) structures. External quantum efficiencies (EQEs) at lighting brightness (i.e., 800 cd/m2) reached as high as 9.8% at 5.2V for OLEDs using the heteroaromatic PO hosts doped with the sky blue phosphor, iridium(III)bis(4,6-(di-fluorophenyl)-pyridinato-N,C2’) picolinate (FIrpic). Comparing device properties at a similar current density (i.e., J = 13 mA/cm2) showed the dibenzothiophene-bridged PO compound exhibits the highest EQEs and lowest operating voltages at all phosphor dopant levels. These results are explained with respect to the effects of the inductive phosphine oxide substituents on electrochemical, photophysical and electroluminescence properties of the substituted heteroaromatic building blocks.
Revised: May 9, 2008 |
Published: November 19, 2007
Citation
Sapochak L.S., A.B. Padmaperuma, P.A. Vecchi, X. Cai, and P.E. Burrows. 2007.Designing Organic Phosphine Oxide Host Materials Using Heteroaromatic Building Blocks: Inductive Effects on Electroluminescence. In Proceedings of the SPIE: Organic Light Emitting Materials and Devices XI, edited by ZH Kafafi; F So, 6655. Bellingham, Washington:SPIE Press.PNNL-SA-56685.doi:10.1117/12.740970