Sodium-ion battery is a promising candidate for energy storage application, but the absence of high-capacity and low-cost anode materials significantly limit their practical specific energy and cost. Red phosphorus (RP) possesses a high theoretical specific capacity but suffers from large volume change, low electronic conductivity and unstable solid-electrolyte interphase (SEI). Herein, a hierarchical micro/nanostructured antimony-doped RP/carbon anode was developed, which demonstrate extraordinary electrochemical performance with high initial Coulombic efficiency of ~90%, high areal (~1.7 mAh cm-2) capacity together with good cycle stability and rate capability. Combined experimental and computational studies consistently revealed that such a unique structural design can dramatically accommodate the mechanical
stress and moreover effectively restrain the undesired decomposition of electrolyte solvents regardless of electrolytes formulation, resulting in superior structural integrity and thin/robust SEI formation during cycling. The present finding has offered an alternative strategy for stress management and interface engineering on high-capacity alloying-based anode materials.
Revised: February 24, 2021 |
Published: February 12, 2021
Citation
Liu X., B. Xiao, A. Daali, X. Zhou, Z. Yu, X. Li, and Y. Liu, et al. 2021.Stress- and interface-compatible red phosphorus anode for high-energy and durable sodium-ion batteries.ACS Energy Letters 6, no. 2:547-556.PNNL-SA-158864.doi:10.1021/acsenergylett.0c02650