Previous research at the Pacific Northwest National Laboratory (PNNL) has demonstrated that the low frequency electromagnetic (EM) response of a sealed metallic container interrogated with an encircling coil is a strong function of its contents and can be used to form a distinct signature which can confirm the presence of specific components without revealing hidden geometry or classified design information. Finite element simulations have recently been performed to further investigate this response for a variety of configurations composed of an encircling coil and a typical nuclear material storage container. Excellent agreement was obtained between simulated and measured impedance signatures of electrically conducting spheres placed inside an AT-400R nuclear container. Simulations were used to determine the effects of excitation frequency and the geometry of the encircling coil, nuclear container, and internal contents. The results show that it is possible to use electromagnetic models to evaluate the application of the EM signature technique to proposed versions of nuclear weapons containers which can accommodate restrictions imposed by international arms control and treaty verification legislation.
Revised: September 2, 2013 |
Published: January 1, 2013
Citation
Aker P.M., K.J. Bunch, and A.M. Jones. 2013.Simulation and Experimental Validation of Electromagnetic Signatures for Monitoring of Nuclear Material Storage Containers.JNMM. Journal of Nuclear Materials Management 41, no. 2:4-13.PNNL-SA-84149.