The increasing demand for energy storage devices has propelled research for developing efficient supercapacitors (SC) with long cycle life and ultrahigh energy density. Carbon-based materials are commonly used as electrode materials for SC. Herein, we report a new approach to improve the SC performance utilizing a Porous Carbon/Cerium Oxide nanoparticle (PC-CON) hybrid as electrode material synthesized via a low temperature hydrothermal method. Through this approach, charges can be stored not only via
electrochemical double layer capacitance (EDLC) from PC but also through pseudo-capacitive effect from CeO2 nanoparticles (NPs). The electrode-electrolyte interaction due to the electrochemical properties of the electrolyte provides a enhanced voltage window for the SC. Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), X-ray Photoelectron Spectroscopy (XPS), and X-Ray Diffraction (XRD) measurements were used for the characterization of this PC/CeO2 hybrid material system. The testing results have shown that a maximum of 500% higher specific capacitance could be obtained using PC/CeO2 instead of using PC only.
Revised: April 1, 2020 |
Published: June 13, 2017
Citation
Kim H., M.I. Shuvo, H. Karim, M.I. Nandasiri, A.M. Schwarz, V. Murugesan, and J. Noveron, et al. 2017.Porous Carbon/CeO2 Nanoparticles Hybrid Material for High-Capacity Super-Capacitors.MRS Advances 2, no. 46:2471-2480.PNNL-SA-121629.doi:10.1557/adv.2017.420