Thermal aging degradation of cast austenitic stainless steels (CASS) was studied by electron microscopy to understand the mechanisms for thermal embrittlement potentially experienced during extended operations of light water reactor coolant systems. Four CASS steels – CF3, CF3M, CF8, and CF8M – were thermally aged up 1500 hours at 330 °C and 400 °C, and the microstructural evolution of the material was characterized by analytical aberration-corrected scanning transmission electron microscopy. The primary microstructural and compositional changes during thermal aging were spinodal decomposition of the d-ferrite into a/a`, precipitation of G-phase in the d-ferrite, segregation of solute to the austenite/ferrite interphase boundary, and growth of M23C6 carbides on the austenite/ferrite interphase boundary. These changes were shown to be highly dependent on aging temperature and chemical composition, particularly the amount of C and Mo. A comprehensive model is being developed to correlate the microstructural evolution with mechanical behavior and simulation.
Revised: November 10, 2017 |
Published: January 1, 2018
Citation
Lach T.G., and T. Byun. 2018.Microstructural Evolution of Cast Austenitic Stainless Steels under Accelerated Thermal Aging. In Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, August 13-17, 2017, Portland, Oregon. The Minerals, Metals & Materials Series, 2, 643-652. Cham:Springer.PNNL-SA-125180.doi:10.1007/978-3-319-68454-3_49