PNNL

Abstract

The compositions utilized for immobilization of nuclear waste are controlled using glass property models to avoid the deleterious effects of crystallization in the high-level waste (HLW) vitrification melters. The type and size of the crystals that precipitate during melter operations (typically at 1150 °C) and idling (~ 1000 °C) are significantly impacted by glass composition and thermal history. This study was conducted to measure the impact of melt composition and heat treatment temperature on crystal size and fraction. A matrix of 31 multi-component glasses canvasing the expected Hanford HLW compositional space was developed and the glasses fabricated and heat treated at 850 = T = 950°C. The crystal filling fraction values, as determined by X-ray diffraction, varied from 0.2 to 41.0 wt%. Spinel filling fraction values ranged from 0.0 to 13.8 wt%. One glass of the matrix did not precipitate spinel and contained 0.2 wt% RuO2, which was assumed to be undissolved from the melting process. All compositions contained crystals in the as-quenched glass. All of the spinel based crystals present in the glasses were less than 10 µm in diameter, as determined by scanning electron microscopy. Composition and temperature dependent models were generated using the resulting data and the best model fit was obtained by only considering spinel filling fractions (R2 = 0.83). Two glasses were unable to be characterized due to an inability to process the glass under the conditions of this study. Those glasses were utilized to give insight into a potential multi-component constraint to aid in future statistical composition designs.