June 15, 2004
Journal Article

Identifying the Sources of Subsurface Contamination at the Hanford Site in Washington using High-precision Uranium Istopic Measurements

Abstract

In the mid-1990s, a groundwater plume of uranium (U) was detected in monitoring wells in the B-BX-BY Waste Management Area at the Hanford Site in Washington. This area has been used since the late 1940s to store highlevel radioactive waste and other products of U fuel-rod processing. Using multiple-collector ICP source magnetic sector mass spectrometry, high-precision uranium isotopic analyses were conducted of samples of vadose zone contamination and of groundwater. The isotope ratios 236U/238U, 234U/238U, and 238U/235U are used to distinguish contaminant sources. On the basis of the isotopic data, the source of the groundwater contamination appears to be related to a 1951 overflow event at tank BX-102 that spilled high-level U waste into the vadose zone. The U isotopic variation of the groundwater plume is a result of mixing between contaminant U from this spill and natural background U. Vadose zone U contamination at tank B-110 likely predates the recorded tank leak and can be ruled out as a significant source of groundwater contamination, based on the U isotopic composition. The locus of vadose zone contamination is displaced from the initial locus of groundwater contamination, indicating that lateral migration in the vadose zone was at least 8 times greater than vertical migration. The time evolution the groundwater plume suggests an average U migration rate of _0.7-0.8 m/day showing slight retardation relative a groundwater flow of ~1 m/day.

Revised: November 10, 2005 | Published: June 15, 2004

Citation

Christensen J.N., P. Dresel, M.E. Conrad, K. Maher, and D.J. DePaolo. 2004. Identifying the Sources of Subsurface Contamination at the Hanford Site in Washington using High-precision Uranium Istopic Measurements. Environmental Science & Technology 38, no. 12:3330-3337. PNNL-SA-42520.