An international study of fast pyrolysis of lignin was undertaken. Fourteen laboratories in eight different countries contributed. Two lignin samples were distributed to the laboratories for analysis and bench-scale process testing in fast pyrolysis. Analyses included proximate and ultimate analysis, thermogravimetric analysis, and analytical pyrolysis. The bench-scale test included bubbling fluidized bed reactors and entrained flow systems. Based on the results of the various analyses and tests it was concluded that a concentrated lignin (estimated at about 50% lignin and 50% cellulose) behaved like a typical biomass, producing a slightly reduced amount of a fairly typical bio-oil, while a purified lignin material was difficult to process in the fast pyrolysis reactors and produced a much lower amount of a different kind of bio-oil. It was concluded that for highly concentrated lignin feedstocks new reactor designs will be required other than the typical fluidized bed fast pyrolysis systems.
Revised: June 17, 2010 |
Published: May 1, 2010
Citation
Nowakowski D.J., A.V. Bridgwater, D.C. Elliott, D. Meier, and P. de Wild. 2010.Lignin Fast Pyrolysis: Results from an International Collaboration.Journal of Analytical and Applied Pyrolysis 88, no. 1:53-72.PNNL-SA-71150.