Geological repositories for nuclear waste, including spent nuclear fuel, present a significant
challenge for traditional International Atomic Energy Agency (IAEA) safeguards tools due to their inaccessibility
and demanding operational conditions. The IAEA has been working closely with Member State
organizations currently involved in repository construction and planning, including Euratom, the
Finnish and Swedish regulatory authorities, and relevant facility operators. However, the
verification challenge remains unsolved, and there persists an out- standing need for tools and
approaches that will help the IAEA verify that no nuclear material is diverted from a repository
environment. The challenge is also not static. Activities must encompass verification of the
design, prior to and during the construction/operation phase, and post backfill. Throughout these
various phases, it is imperative that the IAEA maintains a continuity of knowledge (CoK) of all
material including information on material inventory and flow. This paper highlights these
challenges and outlines how they might be addressed by using remote or autonomous vehicles.
Specifically, we discuss the current state of the art in robotic autonomy for known or partially
known environment mapping and patrolling, as well as shared autonomy, where humans collaborate with
closed-loop autonomation to complete tasks. We explore the feasibility of using rovers for these
verification tasks, along with the challenges associated with system implementation. Hardware and
software suggestions are provided based on the adoption of similar technologies in other
comparable areas and ability to close technical gaps. Lastly, human-robotic interactions are
considered based on the challenges of the environment of the repository and effective deployment and continued operation of the robot system.
Revised: December 7, 2020 |
Published: September 14, 2020
Citation
Lee Y., R. Kumar, J.M. Benz, H. McGee-Hilbert, G. Hollinger, and C. Palmer. 2020.Autonomous Monitoring of Nuclear Repositories: Current State of the Art and Future Directions. In Proceedings of the INMM 61st Annual Meeting, July 12-16, 2020, Baltimore, MD.PNNL-SA-153626.