Secondary organic aerosols (SOA) formed in the atmosphere from the condensation of semivolatile oxidation products are a significant component of airborne particles
which have deleterious effects on health, visibility, and climate. In this study, atmospheric solids analysis probe mass spectrometry (ASAP-MS) is applied for the first time to the identification of organics in particles from laboratory systems as well as from ambient air. SOA were generated in the laboratory from the ozonolysis of r-pinene and isoprene, as well as from NO3 oxidation of r-pinene, and ambient air was sampled at forested and suburban sites. Particles were collected by impaction on ZnSe disks, analyzed by Fourier transform-infrared spectroscopy (FT-IR) and then transferred to an ASAP-MS probe for further analysis. ASAP-MS data for the
laboratory-generated samples show peaks from wellknown products of these reactions, and higher molecular weight oligomers are present in both laboratory
and ambient samples. Oligomeric products are shown to be present in the NO3 reaction products for the first time. A major advantage of this technique is that
minimal sample preparation is required, and complementary information from nondestructive techniques such as FT-IR can be obtained on the same samples.
In addition, a dedicated instrument is not required for particle analysis. This work establishes that ASAP-MS will be useful for identification of organic components
of SOA in a variety of field and laboratory studies.
Revised: October 23, 2013 |
Published: July 15, 2010
Citation
Bruns E.A., E.A. Bruns, V.M. Perraud, J. Greaves, and B.J. Finlayson-Pitts. 2010.Atmospheric Solids Analysis Probe Mass Spectrometry: A New Approach for Airborne Particle Analysis.Analytical Chemistry 82, no. 14:5922–5927. doi:10.1021/ac101028j