At AWE, we have developed a process for the immobilization of ILW waste containing a significant quantity of chloride with Ca3(PO4)2 as the host material. Waste ions are incorporated into two phosphate-based phases, chlorapatite [Ca5(PO4)3Cl] and spodiosite [Ca2(PO4)Cl]. Non-active trials performed at AWE with Sm as the actinide surrogate demonstrated the durability of these phases in aqueous solution. Trials of the process, in which actinide-doped materials were used, wer performed at PNNL where the waste form was found to be resistant to aqueous leaching. Initial leach trials conducted on 239Pu /241Am loaded ceramic at 40°C/28 days gave normalized mass losses of 1.2 x 10-5 g.m-2 and 2.7 x 10-3 g.m-2 for Pu and Cl respectively. In order to assess the response of the phases to radiation-induced damage, accelerated ageing trials were performed on samples in which the 239Pu was replaced with 238Pu. No changes to the crystalline structure of the waste were detected in the XRD patterns after the samples had experienced a radiation dose of 4 x 1018 a?g-1. Leach trials showed that there was an increase in the P and Ca release rates but no change in the Pu release rate.
Revised: July 6, 2010 |
Published: March 31, 2009
Citation
Metcalfe B., I.W. Donald, S.K. Fong, L.A. Gerrard, D.M. Strachan, and R.D. Scheele. 2009.Ageing of a phosphate ceramic used to immobilize chloride-contaminated actinide waste.Journal of Nuclear Materials 385, no. 2:485-488.PNNL-SA-60519.