News & Media

Latest Stories

15 results found
Filtered by Fuel Cycle Research, Reactor Operations, and Waste-to-Energy and Products
DECEMBER 4, 2019
Web Feature

A More Painless Extraction

PNNL and Argonne researchers developed and tested a chemical process that successfully captures radioactive byproducts from used nuclear fuel so they could be sent to advanced reactors for destruction while also producing electrical power.
JUNE 20, 2016
Web Feature

Keeping Fast Reactor Steel in Shape

In fast-neutron reactors, fuel is sealed in ~7 millimeter diameter steel tubes called cladding. When a high-energy "fast" neutron strikes an atom in the steel, it can knock the atom out of place, like a cue ball striking another billiard ball. This leaves two types of damage in the metal: an empty spot where the atom was, and the displaced atom wedged between other atoms. Over time, these defects typically drive undesirable rearrangement of the microstructure, potentially reducing the life of the cladding.
NOVEMBER 1, 2015
Web Feature

New Watts Bar Reactor Gets Green Light for Operations

On October 22, the U.S. Nuclear Regulatory Commission (NRC)​​​​​​​granted Tennessee Valley Authority's (TVA's) Watts Bar Nuclear Generating Station a 40-year operating license for its new Unit 2 reactor. This is the first nuclear reactor to be granted an operating license by the NRC in two decades.
OCTOBER 12, 2015
Web Feature

Corrosion Cracking: When Does it Really Start?

Pressurized water nuclear reactors in the United States generate about 13 percent of U.S. electricity. Though efficient, these reactors face a unique challenge with stress corrosion cracking (SCC). This type of corrosion is one of the primary life-limiting degradation mechanisms of nickel-base alloy pressure boundary components, such as instrumentation and control rod nozzles, the welds that attach these nozzles to the reactor vessel, and welds that connect feedwater piping to the reactor vessel. As interest grows in a more sustainable and efficient fleet of nuclear reactors across the world, there is increasing interest in characterizing SCC initiation response.